The Net Purifier
free guide for MikroTik

If you have a MikroTik router, filtering all connected devices using The Net Purifier is so simple, watch the video or follow these steps:

ATTENTION: This guide using TNP DNS Indonesia Region, you choose use other TNP DNS from different region near to your country, or choose the TNP DNS with the lowest Ping

  1. Login to your MikroTik using Winbox
  2. Clik IP then click Firewall
  3. Click NAT then click Add (+)
  4. Click General, select Chain = dstnat, select Protocol = udp, set Dst. Port = 53, then click Extra
  5. Click Nth, set Every = 2, set Packet = 1, then click Action
  6. Select Action = dstnat, To Addresses = TNP DNS1 Server, To Ports = TNP DNS1 Port, then click Comment, then write comment as "TNP DNS1", then click OK (comment), then click OK (NAT Rule)
  7. Again, add new NAT (for TNP DNS2)
  8. Click General, select Chain = dstnat, select Protocol = udp, set Dst. Port = 53, then click Action
  9. Select Action = dstnat, To Addresses = TNP DNS2 Server, To Ports = TNP DNS2 Port, then click Comment, then write comment as "TNP DNS2", then click OK, then click OK
  10. Finally, go to https://thenetpurifier.com to see your device has purified or not. If not purified, repeat the steps again to find mistakes
  11. If purified, use internet as usual, and feel the differences between before and after purified